STAGING and DRAPERY

Event stages are typically modular designs based on stock components due to their one off single use nature. Most vendors use 4' square platform units that require two men to handle and take a lot of time to erect and tear down. Over the years, we found that four feet often isn't enough but eight feet is too much. Sometimes they simply won't fit in the available space! So we use a 4' by 6' rectangular module that gives us more dimentional options and can be handled by just one stage technician.
Other vendors use risers with folding legs. Problem is they are fixed height and can't change. We use film industry 'apple boxes' to support our stages that allow instant heights of 4", 8", 12", 16", or 24" with the added benefit that the weight is more evenly distributed on the floor protecting carpets from damage. For taller stages, our platform modules work with standard builder's scaffolding which we also have on hand. We also provide steps at 6" and 8" riser increments.
Some venues have limited physical access so our staging will fit on any elevator or navigate any corridor with a special dolly designed to make handling by a single technician possible. Setup and removal is very fast and we have done events where our event stage was quickly setup and removed during the event allowing the space to be repurposed. We manufacture our event staging in house and can design and build special requirements.