INSTRUCTIONS |
Purpose |
This worksheet serves two uses. First, it is used by the build shop to indicate how
many of each fixture type to build, how they are configured, and how each should be marked.
Second, it is used by the programmer/operator to label the controller and assist in developing
chases.
|
Architecture |
The Chauvet Obey 40 controls twelve 16 channel DMX fixtures
and features six 240 step configurable chases where each step is one scene.
|
Printing |
For best results, set printer to only print page one unless you need copies of
these instructions. |
Event |
This block can be used to describe the event. |
Start Date |
This block can be used to indicate date when fixtures need to be ready. |
End Date |
This block can be used to indicate date when fixtures will be available for the next event. |
Universe |
DMX is divided into universes of 512 channels. Indicate which universe this controller
will manage.
|
DMX Range |
Specifies the DMX range used on this universe. |
Description |
Specify the fixture type, mounting hardware, and use. |
Qty |
How many fixtures to provide with these settings. |
Mark |
Indicate how fixtures should be marked at build so the correct fixture is
mounted at the appropriate location. Typically, we specify the Universe
and starting address e.g. '1/17' or '2/1'
|
Chase Description |
Indicate what each of the six chases does e.g. warm forward chase,
cool reverse chase, warm alternating chase etc. |