| INSTRUCTIONS |
| Purpose |
This worksheet is used to document fader to fixture assignments when the Stage De signer 50 is used
in the single scene mode which allows control of 48 DMX channels grouped in two pages.
|
| Architecture |
The Chauvet Stage Designer 50 can operate in single scene mode controlling 24 DMX channels on
Page A and 24 DMX channels on page B. Page A and Page B operate independently from one another.
Note, however, switching pages while faders are active can result in unintended behavior.
|
| Printing |
For best results, set printer to only print page one and two unless you need copies of
these instructions. |
| Event |
This block can be used to describe the event. |
| Start Date |
This block can be used to indicate date when fixtures need to be ready. |
| End Date |
This block can be used to indicate date when fixtures will be available for the next event. |
| Universe |
DMX is divided into universes of 512 channels. Indicate which universe this controller
will manage.
|
| DMX Range |
Specifies the DMX range used on this universe. |
| MIDI Input Channel |
Specifies the input channel for MIDI comunications in the range of 1-16. |
| MIDI Output Channel |
Specifies the output channel for MIDI communications in the range of 1-16. |
| Auxiliary 1 |
Specify for the first precision encoder its mode in range of 1 to 3 and channel from range 1-48. |
| Auxiliary 2 |
Specify for the second precision encoder its mode in range of 1 to 3 and channel from range 1-48. |
| DMX Channel |
Indicates the DMX channel to assign to the fixture start address.
For multi-channel fixtures, block out the rest of the channels used by the fixture. |
| Fader |
Indicates the fader number that controls this feature of the fixture. |
| Function |
Describe how this fader affects the 'look' e.g. Stage Left Red Wash.
|
