INSTRUCTIONS |
Purpose |
This worksheet is used to document Stage Designer 50 DMX channel to fader patching for an event.
|
Architecture |
The Chauvet Stage Designer 50 provides the capability to re-assign all DMX channel to
Fader assignments. This is particularly useful to allow Page B channels (25-48) to 'move up'
to the Page A space. Alternatively unused Page A channels (1-24) can 'move down' to the
Page B space. This allows DMX channels to be deployed more efficiently.
|
Procedure |
Press and hold RECORD, then press 6, 6, 6 to enter patch mode.
Press channel bump corresponding to DMX channel to be reassigned.
Press and hold RECORD, then press channel bump corresponding to
the desired fader to control it.
Press and hold RECORD, then press REC EXIT to exit patch mode.
|
Printing |
For best results, set printer to only print page one through three unless you need copies of
these instructions. |
Event |
This block can be used to describe the event. |
Start Date |
This block can be used to indicate date when fixtures need to be ready. |
End Date |
This block can be used to indicate date when fixtures will be available for the next event. |
DMX Channel |
Indicate DMX channels from 1 through 48. |
Fader |
Indicate which fader has been assigned to this channel. If blank, indicates normal assignment.
All 48 DMX channels could be assigned to a single fader.
|
Fixture/Function |
Indicate the purpose of the fader/channel.
|